The shipment of rolling diaphragms must be carefully and safely issued with ASCO solenoid valve diaphragms, ASCO solenoid valve diaphragms, etc.
DWYF-ZC-10D programmable pulse control instrument QYM-LC-12D parameter value resistance positive electrode plate, MC side triggered volatile pulse negative spray.
Quality description of aluminum gun: cast iron. Steel, two point line, one inch, customizable, stainless steel, and pendulum.
Shanghai Kaiyangsi Pneumatic Diaphragm Pump is a type of diaphragm from Shanghai Tiequan, suitable for transporting sludge and sewage. It is installed near the pump outlet for sawdust, sulfuric acid, hydrochloric acid, hydrofluoric acid, aqua regia, and sewage, and is used for drainage. Although it is manually bonded and insulated with the inner wall of the pipeline.
Kaiyang Xuzhou Pneumatic Diaphragm Pump: Plastic Pneumatic Diaphragm Pump, PTFE Pneumatic Diaphragm Pump, PP Pneumatic Diaphragm Pump, Cast Iron Pneumatic Diaphragm Pump, Stainless Steel Pneumatic Diaphragm Pump, Aluminum Alloy Pneumatic Diaphragm Pump, PVDF, PP Engineering Plastic Pneumatic Diaphragm Pump, QBY Fluorine Lining, PTFE Diaphragm Pump, Plastic Pneumatic Diaphragm Pump, Fluid Fluorine Lining, Food Rubber Diaphragm Pump, PTFE Diaphragm Pump.
Rolling diaphragm servo diaphragm
Shandong Kaiyang Xuzhou Pneumatic Diaphragm Pump Manufacturer’s Daily Standard Test: Super production, recently solved the problem of diaphragm pump leakage, often through the “wet drying” activated carbon drying “integration technology, the effective weight of the connection and transformation of the structure line, further dehydration of the disc, achieved biomass expansion, solved transportation problems, expanded the Zigu, Group, and water conservancy solution system, and obtained pollution-free and optional efficiency.
The maximum pressure at the inlet and outlet of the top pump of Guangdong Company does not exceed 300Pa/min, which can meet various pollution-free, water free and medium free transportation requirements, and can withstand very low atmospheric pressure.
The front pressure is equipped with five materials: aluminum alloy, cast iron, stainless steel, engineering plastic, lining (rubber lining, fluorine lining), stainless steel, fluid, corrosive oil seal, fluorine lining, grease, food grade, fluorine lining, water seal, hygiene grade, lining (rubber lining, fluorine lining), etc.
The throat tray is also equipped with stainless steel precision small vacuum back pressure, with a side mounted temperature of 90 ° C, and is equipped with atmospheric pressure, nominal diameter, pressure, and flow regulation.
Back pressure valve: used to prevent liquid from flowing or siphoning under the action of gravity. At this time, the back pressure valve can reduce flow and pressure fluctuations caused by siphoning.
The part in contact with the medium only has the lower valve body and diaphragm, and the sealing area of the lower valve body and diaphragm is processed with sealing ribs, which has a good sealing effect.
The conventional diaphragm adopts EPDM lined PTFE form and is processed with cloth clamping, with good sealing effect and long service life; Pure PTFE membrane has high temperature resistance and strong corrosion resistance.
Applicable temperature: ordinary diaphragm -5 ° C to+80 ° C); Tetrafluoro membrane. 5 ° C to+80 ° C.
