How to obtain IPPC identification for the export rolling diaphragm? The purpose of interpreting common problems is to customize the movement speed and connecting parts of the rubber diaphragm under the pressure of the diaphragm when the overflow liquid is 1-5 meters away.
Before installation, it is necessary to carefully check whether the operating conditions of the pipeline match the applicable range specified in this valve, and clean the inner chamber to prevent dirt from blocking or damaging the sealing components.
When connecting pipelines with rubber diaphragm valves, do not use auxiliary levers to prevent excessive torque from damaging the driving components or sealing parts.
When connecting the valve body and pipeline, the connecting pipeline must be set in a straight line, with a width and square shape;
When the valve body and connecting pipelines of the transmission are connected, the drive iron core, valve body, and diaphragm device must be pre adjusted to the sealing position to ensure no fiber detachment.
The seamless adjustment of the driving iron core makes the piston smaller towards the outer edge, and one end of the driving iron core is inserted, followed by the rotation and conversion of the square pipeline, so that the entire pipeline system pressure can complete any driving component within the range of 30~100Pa.
Ensure pipeline pressure to prevent low outlet pressure of the pulse valve, thus enabling tetrafluoroethylene sealing.
800. Observe the sealing: increase the sealing power with the arrow on the ash discharge valve, otherwise the mechanical seal will age.
The failure of the pulse valve diaphragm is a common fault, which directly affects the cleaning effect. This device belongs to the outer edge, and in order to enhance its pressure resistance, it uses an inner diameter to avoid rotation and prolong its service life.
● Since the pulse valve diaphragm is a compliant mechanism that requires frequent opening and closing actions to control the air flow, and requires good flexibility, as well as the highest possible sealing, the material of the pulse valve diaphragm is directly related to the service life and use effect of the pulse valve diaphragm.
Continuous and uniform stress is required, and the strength and elasticity of the membrane will age. The mother of the diaphragm has small protruding pores, but once it ages, it needs to be replaced.
