GENERAL SEALTECH LIMITED is located in Hangzhou City and is a physical enterprise that integrates research and development, production, and sales. Our company specializes in producing Turbo Actuator Waste-gate Diaphragms,Rolling diaphragm,Teflon / PTFE Diaphragm,Solenoid Pulse Valve Diaphragms,Diaphragm Valve pump Diaphragms,Rubber diaphragms and other products. Our company accepts various customized products and has a comprehensive ability to develop and produce special-shaped workpieces.
The company adheres to the cooperation philosophy of quality first and customer first, and has a group of long-term cooperative fixed customers in Africa, the Middle East, Europe and America, and other places. We not only have high product quality, but also excellent service.
|keihin fcr accelerator pump diaphragm
|Place of Origin
|Smooth, glossy, textured, matte
|carton or according to requirements of the customers
|Online technical support
|Seal for Machine,Electrical Appliances…etc
|Fire Resistance,Strong Resilience,Cold Resistance…etc
|50000-200000 Piece/Pieces per Month
|Lead time (days)
|7-15 (To be negotiated)
Please note: This table is for reference only, please consult us for specific information.
keihin fcr accelerator pump diaphragm products typically have high plasticity and can be used in very low temperatures and high temperature ranges. They can also be produced using different technologies such as thin film construction, hot melt construction, and fiber construction.
The diaphragm has strong wear resistance, but it is easily damaged during installation. If cracks appear, they should be reinstalled in a timely manner;
During normal use, check the sealing condition of the diaphragm to prevent water leakage;
Please do not change the installation position of the diaphragm product during use to avoid affecting the effect.
Adopting the latest technology to ensure optimal material detail processing and high-quality performance.
keihin fcr accelerator pump diaphragm—FAQs Guide
1.About keihin fcr accelerator pump diaphragm,What information should the customer provide to get an accurate quote from us?
Customers need to provide relevant technical requirements, drawings, pictures, industrial voltage, planned output, etc.
2.Can keihin fcr accelerator pump diaphragm be used in applications requiring compliance with industry standards, such as FDA, ASME, or ISO?
Yes, diaphragms can be used in applications requiring compliance with industry standards, such as FDA, ASME, or ISO. However, the specific requirements of the application must be taken into consideration when selecting the appropriate diaphragm material and design.
3.As a keihin fcr accelerator pump diaphragm manufacturer,what services can we provide?
Free design and samples offered.Custom package and stickers.
4.Are keihin fcr accelerator pump diaphragm used in safety relief valves and pressure relief devices to prevent overpressure situations?
Yes, diaphragms are commonly used in safety relief valves and pressure relief devices to prevent overpressure situations. The diaphragm is a flexible membrane that is designed to open when the pressure inside the device reaches a certain level, allowing the pressure to be released.
5.What types of sealing mechanisms are commonly used with keihin fcr accelerator pump diaphragm, such as clamped, bolted, or adhesive seals?
In general, keihin fcr accelerator pump diaphragm will use these sealing mechanisms:
1. Clamped Seals: Clamped seals are the most common type of diaphragm seal. They are typically used in applications where the pressure is relatively low and the temperature is not too extreme. Clamped seals are easy to install and provide a reliable seal.
2. Bolted Seals: Bolted seals are used in applications where the pressure is higher and the temperature is more extreme. They are more difficult to install than clamped seals, but provide a more reliable seal.
3. Adhesive Seals: Adhesive seals are used in applications where the pressure is low and the temperature is not too extreme. They are easy to install and provide a reliable seal. However, they are not as reliable as clamped or bolted seals.
6.As a keihin fcr accelerator pump diaphragm manufacturer,how can we guarantee quality?
Always a pre-production sample before mass production;Always final Inspection before shipment.
7.As a keihin fcr accelerator pump diaphragm manufacturer,What delivery terms do you accept?
We accept EXW,FOB, CIF. If you want to use other delivery terms,please contact us.
8.Are there keihin fcr accelerator pump diaphragm designed for pulsation dampening or shock absorption in hydraulic systems?
Yes, there are diaphragms designed for pulsation dampening and shock absorption in hydraulic systems. These diaphragms are typically made of rubber or elastomeric materials and are designed to absorb the shock and vibration of the hydraulic system. They are often used in applications such as hydraulic cylinders, pumps, and valves.
9.What is the expected service life of keihin fcr accelerator pump diaphragm, and how does it vary depending on factors like material and usage?
The expected service life of diaphragms can vary greatly depending on the material and usage. Generally, diaphragms made of rubber or elastomeric materials can last anywhere from 5 to 10 years, depending on the application and environment. Diaphragms made of metal or plastic can last much longer, up to 20 years or more. Factors such as temperature, pressure, and chemical exposure can also affect the service life of diaphragms.
10.Do keihin fcr accelerator pump diaphragm require maintenance or replacement over time, and what are the signs that indicate the need for replacement?
Yes, diaphragms require maintenance and replacement over time. Signs that indicate the need for replacement include a decrease in sound quality, a decrease in volume, and a decrease in the overall performance of the diaphragm. Additionally, if the diaphragm is damaged or cracked, it should be replaced immediately.