Diaphragm pump models: angle type, sealing ring, sealing gasket, clamping, butterfly valve, diaphragm spacer, valve body, valve cover, oil seal, clamp spring, air guide plate, vacuum oil seal, compressed air delivery hose, reducer, lower box body, inner pressure plate, drain valve, chassis, diaphragm chamber plate, diaphragm keel, fuel, oil seal, refueling and welding assistance industry products.
Diaphragm pump model: angle type, flange, thread, welding sleeve, metal hose, PA, rubber, brass, plastic waste flange, packaging items, rubber, plastic, filter, brand new, vulcanized.
The diaphragm of the diaphragm pump is made of polytetrafluoroethylene rubber and ethylene propylene diene monomer rubber, which is temperature resistant to+80 ° C and can be used within the recommended temperature range of 0~70 ° C. 90°C。 50~+120°C。
Diaphragm pump is a new type of conveying machinery and is currently the most innovative pump type in China. Using compressed air as the power source, various corrosive liquids, liquids with particles, high viscosity, volatile, flammable, and highly toxic liquids can be pumped and absorbed completely. Its performance parameters are comparable to WLLDENPVMPS from the Federal Republic of Germany, MARIOWPU from the United States, and other countries.
Diaphragm pump, also known as control pump, is the main type of actuator that receives control signals from modulation units and uses power operation to change fluid flow. Diaphragm pumps generally consist of an actuator and a valve. Using compressed air as the power source, various corrosive liquids, liquids with particles, high viscosity, volatile, flammable, and highly toxic liquids can be pumped and absorbed completely.
The diaphragm pump has a simple structure, low fluid resistance, explosive, and highly toxic liquid, which is generally composed of an actuator and a valve. There are no complex control systems, no cables, fuses, etc. Only the executing agency can be matched for execution.
The flow characteristic of the diaphragm pump is close to the fast opening characteristic, which is approximately linear before 60% of the stroke, and the flow rate changes little after 60%.
If there is no signal in the system, there is no need to equip a new generation of diaphragm. Its stress area and pressing pressure have started to decrease, but due to insufficient power consumption, it will affect the normal start of the pump.