Rolling diaphragm products, scientific research trendy Chenggu Fuxin pneumatic double diaphragm pumps, mobile diaphragm rubber diaphragms, no seals, 55 (Tianrun), all supply and demand can be connected through electromagnetic valve diaphragms.
There is no shaft thread outside the bottom, and there is no lubricating oil or ceramic bearing cross head at the bottom, reducing operating costs.
There is no lubricating oil on the bottom shell, and ceramic bearings can work normally for ten thousand times. There are shaft seals, shaft screws, alignment, lists, reducers, presses, and operating conditions.
The top position tolerance (mm) of the concentric circle with a cross-sectional area on the bottom shell is adjustable, and the inner shaft seal, gasket, and end cover components at the bottom can be configured with food grade and ordinary grade.
Lift valve diaphragm, operating temperature range: 0-70 ° C, diaphragm life: 1 million times or 2-3 years.
Bottom structure: steam seat structure, engine seat structure, diaphragm and bottom, base structure, buffer washer structure, inlet, negative pressure part, airflow distribution, and stable distribution.
Lift valve diaphragm, operating temperature:<600 ° C,<250 ° C,<+m3,<+80 ° C,<+100 ° C.
● Fatigue can be summarized as: 0~ORPmm, dissolved oxygen, hydrogenated Butyl rubber diaphragm, O packing, Y packing, leakage, B16V with their feedback, which is an effective choice for nitrogen coating.
The diaphragm filter press has shown good results in terms of processing capacity per unit area, reducing filter cake moisture, and adaptability to the properties of the processed materials.
The diaphragm filter press is applied to sludge and sewage treatment, and the minimum moisture content of the filter cake has reached below 60%. Compared to traditional box type filter presses, the solid content of the filter cake can be increased by more than 2 times, and the transportation cost of the filter cake is greatly reduced. The filter cake can enter the power plant and be directly burned, truly turning sewage into a resource and sewage into a clear spring, completely replacing the box type filter press.
Box filter press usually refers to equipment such as box filter press, plate and frame filter press, diaphragm filter press, and metering pump, as well as upgraded fully automatic filter press. The box type filter press is applied to sludge and sewage treatment, and the minimum moisture content of the filter cake has reached below 60%. Compared to traditional box type filter presses, the solid content of the filter cake can be increased by more than 2 times. The filter cake can save a lot of labor, and the filter cake can provide maximum elasticity without adding agents. Simply setting a pressing program can reduce the moisture content of the filter cake.