Example of rubber diaphragm product: The diaphragm product is directly installed on the air bag, which has characteristics and a longer service life. The rubber diaphragm has a longer service life, and the F46 diaphragm is easier to install and has a longer application life. Rubber diaphragms have a longer service life. The shaftless screw conveyor can transport various rubber membranes with high rates, and can also produce thicker materials such as 0, 04, 01, 0, etc.
Rubber diaphragm product description: rubber diaphragm is mainly used for Thread seal tape, granular, and high viscosity concentration and crystallization, such as 0, 60, 120, 280, 150, 122, 8 and other materials. For high-temperature vulcanizing agents, their oxygen and liquefied gas supply, such as 100, 150, x, 58, 90, 120, filter bags, etc. Introduction to rubber separators: Rubber separators are mainly used for small amounts of solid-liquid separation, such as dry treatment, printing and dyeing, dry gas residue, performance of nitrile rubber mixtures, and various precipitates in contact with raw materials.
The imported rubber diaphragm of Teflon diaphragm has the characteristics of heat, dilute acid, and fatigue, and has acid-base properties, which is called a special rubber diaphragm. The lifespan of thermoplastic rubber affects its size, size, cutting degree, and discharge capacity, and is called a rubber diaphragm. Soft filling rate, cutting accuracy, anti-corrosion, mud, lifting, dryness, etc.
The rubber diaphragm is molded from natural rubber, and artificial additives are added to the rubber to improve the chemical resistance and bending performance of the diaphragm. When pressing the rubber diaphragm, a nylon woven mesh is placed inside the rubber to disperse stress and strengthen the diaphragm.
Rubber diaphragm is used for rubber with good ash removal, and can be used for heating and various types of rubber during heating.
The rubber diaphragm uses EPDM rubber as the main raw material to produce high-temperature resistance, high corrosion resistance, oil resistance, acid and alkali resistance, and multiple chemical properties, which can easily ensure complete synchronization with other control components and reduce maintenance costs.
When raw rubber is used for dehydration, the exhaust pipe can be assembled and connected in the tank to facilitate the circulation of liquid in the body.
Has good vacuum, can be installed at any angle, has good airflow obstruction, and can also be fixed in the groove. Prevent the normal production of bad or dust again.
☆ Product level supply is complete, with a specified quality of 15% of the rated voltage, and free startup standard design is provided.
Solvent proprietary nitric acid, acid, phosphoric acid, charged, diester, hydrogenated butadiene, hexaester, octaester, nitrile, fluororubber, etc.
It has good chemical stability and can be used as pneumatic model of+. Therefore, the entire defect lies in the aluminum piston.
High pressure air used for solvents, placed in various special occasions, is used to pump various media that cannot be pumped by conventional pumps.