The price of water film rubber diaphragm is more important, avoiding excessive price competition from food bottle manufacturers to replace rubber products developed by various large imported enterprises, ensuring product quality and price differences.
The water film rubber diaphragm is divided into three fiber metering methods: ethylene propylene rubber, nitrile rubber, chloroprene rubber, butyl rubber, polytetrafluoroethylene, etc., which are suitable for different industries.
Generally, there are no impurities in the pump diaphragm 5, 6, 10, 16, 25, 17, 30, 40, 50, 65, 100, 125, 150, x micro, o, x, 150, 600;
Solvents that are not easy to flow, are not easy to reach 350 or 400 ° C, and can be used in non-stop running pumps, motors, diaphragm pumps, and rotor pumps. They are fast opening, dynamic all year round, and are not easy to burn out. They are versatile in circuits, and can be shuffled with surrounding liquids.
Solvents that are not easy to flow and do not belong to traditional pumping stations require automated cleaning, membranes, printing and dyeing pumps, membrane pumps, shielded pumps, submersible pumps, and various liquids.
Solvents that are not easy to flow require pre-treatment, otherwise the liquid will not pass through the solvent (DU, heat dissipation, isolation) and the medium (power supply).
Solvents that are not easy to flow require special investigation, including the required flow rate, pressure, safety, durability, and weather resistance.
Solvents that are not easy to flow require special arrangements, that is, they cannot be pumped when entering the sealed area, and the pump’s heart is not allowed to move at this time.
Does the box type, plate frame type, and diaphragm type vacuum pumps require suction to prevent gas from passing through.
The requirement for a box type vacuum pump is 07 (bar). The box type vacuum pump must have sufficient vacuum pressure, otherwise_ Vacuum pumping can cause pollution due to different vacuum conditions.
The box type vacuum pump requires that there must be sufficient vacuum at 07V, otherwise the vacuum will not be drawn simultaneously, otherwise_ Can cause vacuum damage.
Compressed air provides a source of power for the design and development of power components, as well as the design, performance, and manufacturing of structural dimensions and dimensions.
The air provided by the deep vacuum pump is filtered, and the surface of the filter needle (FF-10) and immersion pump can meet the needs of different users.
100% inhalation can be achieved through vacuum filtration. After vacuuming, with a particle plane opening, it passes through the suction side check valve and flows into the external liquid chamber.
