The importance and urgency of accelerating the development of new directions for rolling diaphragm products will be the core and soul of the entire industrial industry. The number of support rings is small, reducing the amount of drive rods is significant, and reducing operating costs. Compared to rolling diaphragms, the drive rod has great applications.
Compared with other filter presses, diaphragm filter presses can reduce the combined force of the driving rod, thus eliminating the need for auxiliary levers. The diaphragm filter press can also be driven twice.
The diaphragm filter press has the advantages of high pressing pressure, good corrosion resistance, convenient maintenance, safety and reliability. It is a popular choice for customers in industries such as metallurgy, gas, papermaking, coking, pharmaceuticals, food, brewing, and fine chemicals.
Diaphragm filter presses have been widely used in various fields that require solid-liquid separation. Diaphragm filter press is considered as an alternative upgrade equipment for ordinary box filter press.
The diaphragm filter press has shown good results in terms of processing capacity per unit area, reducing filter cake moisture, and adaptability to the properties of the processed materials.
The diaphragm filter press is applied to sludge and sewage treatment, and the minimum moisture content of the filter cake has reached below 60%. Compared to traditional box type filter presses, the solid content of the filter cake can be increased by more than 2 times, and the transportation cost of the filter cake is greatly reduced. The filter cake can enter the power plant for direct combustion, truly turning sludge into a resource and sewage into a clear spring, completely replacing the box type filter press.
Firstly, the foundation of the diaphragm filter press should be leveled before installation, and the levelness error of each installation reference plane should not exceed 2mm.
Install the oil cylinder support and level it with a pad. The upper planes of the two supports are on the same horizontal plane, and the bolts between the oil cylinder and the support are not tightened. Then, install the oil cylinder on the oil cylinder support and tighten the foundation bolts.
After installation, the tail plate should be leveled, and another main beam should be installed and fixed with a clamp. The positioning clamps between the two main beams and the tail plate should be installed in place without leaving any gaps.
Align the diaphragm. Measure the level of the two main beams with a level gauge. The height difference between any two points on the two main beams should be less than 3mm. The height of the main beam should be adjusted by the main beam pillars, and the error between the two diagonal lines of the frame should be less than 6mm. This can be achieved by adjusting the left and right positions of the tail plate.
Bag dust collector series, cyclone dust collector series, electromagnetic pulse valve series, pulse controller series, dust removal bag series, dust removal framework series, unloader series, suspension device series, pulse valve diaphragm series, cylinder series.
Daily maintenance and precautions of pulse bag dust collector equipment. The working principle of bag dust collector and the introduction to the repair and maintenance methods of bag dust collector. Precautions during debugging of bag dust collector. Precautions before stopping the operation of bag dust collector.