The importance and urgency of accelerating the development of new directions for rubber diaphragm products are the reasons and composition of valve types, valve stems, diaphragms, and valve covers. The diaphragm pump uses a special filtering medium to apply a certain amount of pressure to the object, causing the liquid to seep out of the surface, and the diameter of the suction pipeline is per meter.
Diaphragm pump is a special form of shut-off valve, whose opening and closing parts are a diaphragm made of soft material, which separates the valve body cavity from the valve cover cavity.
The biggest difference between diaphragm pumps and other valves is that they adopt a structure without a packing box; The rubber diaphragm can ensure that all driving components are fast, low noise, portable, and maintenance free, achieving the advantages of pump valve cleaning, installation, and maintenance.
In addition to conventional to standard straightness, the impeller also has excellent compressive strength, oxygenation performance, maintenance free, and can be started and stopped with poor overload capacity.
The outer diaphragm, which achieves powder flow and drip protection functions, adopts suction, diffusion, damping performance, lubrication free, and overload protection functions. It is composed of one or several finger shaped diaphragms at 0~.
Special diaphragm for protecting the air compressor, without leakage, without the need for refueling, pressurized steering, pressure adjustment, connection, temperature adjustment, and other specific working conditions, according to the system working pressure and oxygen index. Standard configuration for liquid level and other positions.
Diaphragm pumps can transport media completely without leakage, allowing solid particles to be sucked into the pipeline, reducing operating resistance, and facilitating maintenance.
No need for irrigation and water diversion, with a suction head of up to 5m, a lift of 50m, and an outlet pressure of ≥ 6kgf/cm2.
The flow is spacious and the passing performance is good, allowing the maximum particle diameter to reach 10mm. When pumping mud and impurities, there is minimal wear on the pump;
The head and flow rate can be adjusted steplessly through the opening of the air valve (the air pressure can be adjusted between 1-7kg/cm2).
Convenient to use, reliable in operation, and easy to open and close gas valves for start and stop. Even if there is no medium for a long time or sudden shutdown due to unexpected circumstances, the pump will not be damaged. Once overloaded, the pump will automatically stop, with self-protection performance. When the load returns to normal, it can automatically start and run;
The pump has a simple structure and fewer vulnerable parts. It is easy to install and maintain, and the medium conveyed by the pump will not come into contact with moving parts such as the distribution valve and connecting rod. Unlike other types of pumps, the performance gradually decreases due to wear and tear of rotors, pistons, gears, blades, and other components;
This product has been installed with a heat-resistant ventilation butterfly valve before leaving the factory. When reversing and assembling mechanical equipment such as springs, rotors, and valve stems, it can save energy and reduce mechanical movement load_ Reversing the blowing rate.