Why are rubber diaphragm products favored by consumers? Why are rubber diaphragm products widely used in aluminum products, submersible pumps, food rubber, plastics, beverages, dry and clean worlds, tension, temperature, accessory types, and depth.
Why is rubber diaphragm easily damaged? Plastic diaphragm air pump is an excellent extension valve for extremely low temperature and extremely low temperature media. It is a general grade diaphragm and can be used for media under temperature, extremely high temperature, and extremely high temperature.
For nylon rubber diaphragms, they have a long service life and can accurately synchronize with other control components to ensure the injection of pulse compressed air.
● Frequently check whether the pulse dust cleaning system of the dust remover can blow normally. If not, check whether the pulse valve diaphragm and solenoid valve are out of order or damaged, and maintain or replace them in time.
If a pulse valve malfunctions, it should be promptly eliminated. If there are impurities, moisture, and other foreign objects inside, they should be cleaned in a timely manner. If the diaphragm is damaged, it should be replaced in a timely manner.
Regularly check the working condition of the pulse valve and pulse valve to avoid affecting the long blowing time of the pulse valve.
The pressure at the diaphragm of the pulse valve is the nominal pressure. The blowing time on the diaphragm of the pulse valve should be connected to the pulse valve. When cleaning the ash, the solenoid valve should be connected to the pulse valve.
According to the size and angle of the pulse valve, it can be divided into 3, 4, 10, 16, 20, 16, 30, 40, 50, 65, 80, 100, 125, 150, and 250mm.
According to the number of pulse valves, they can be divided into 3, 50, 125, 150, 170, 180, etc.
The working pressure of the product is 01MPa~07MPa, and the medium is air that has undergone oil and water removal treatment.
Under specified environmental conditions, the insulation resistance of the electromagnetic coil to the shell should be greater than 1M Ω.
● Under the condition that the room temperature is 5 ℃~35 ℃ and the relative humidity is not more than 85%, the solenoid coil of the Electromagnetic pulse valve can withstand the voltage of 50Hz and 250V to the housing for 1 minute without breakdown.
● When the working voltage of the Electromagnetic pulse valve is 85% of the rated voltage under the nominal air source pressure of the product, the opening response time shall be less than 003s.
● The Electromagnetic pulse valve shall be able to work normally after withstanding the vibration with frequency of 20Hz, full amplitude of 2mm and duration of 30min.
● Under normal use conditions, the cumulative service life of Electromagnetic pulse valve diaphragm shall be more than 800000 times< Eod>.
