Germany’s processing of the adjustment problem system for the rubber diaphragm industry chain includes manufacturing rubber diaphragms, cloth clamping diaphragms, filter presses, and pre prepared diaphragms.
The perfect diaphragm sleeve can be divided into the following types: 1) Rubber diaphragm: cloth rubber, rubber film: non-standard parts should be customized, and suitable sealing parts should be selected according to the actual situation.
● Service life of the adhesive film flange: maximum, length, short, non adhesive, when weaving adhesive, time for re diaphragm: positive pressure, compression stress relaxation, opening, closing, during use, the diaphragm pump cannot be closed, otherwise it will damage the work and take on left, right, and internal parts.
Pneumatic diaphragm pump refers to a diaphragm valve that is controlled by electromagnetic or pneumatic pilot valves and can instantly open and close a high-pressure air source to generate pulses.
Rubber diaphragm: The diaphragm pumps produced by our company are produced using cloth sandwiched rubber hoses, which are oil resistant, acid and alkali resistant, corrosion resistant, aging resistant, and have a long service life.
Rubber diaphragm: Our company produces diaphragm pumps with quality options, including gas valves, O-rings, oil seals, etc., which are resistant to oil, acid, alkali, acrylic acid, hydrochloric acid, and hydrofluoric acid. Aqua regia, double diaphragm, etc.
Rubber diaphragm: The production and sales price of electromagnetic valve diaphragms, as well as the smooth, flat, crack free, and bubble free surface of the products.
The working pressure of the product is 01MPa~07MPa, and the medium is air that has undergone oil and water removal treatment.
Under specified environmental conditions, the insulation resistance of the electromagnetic coil to the shell should be greater than 1M Ω.
● Under the condition that the room temperature is 5 ℃~35 ℃ and the relative humidity is not more than 85%, the solenoid coil of the Electromagnetic pulse valve can withstand the voltage of 50Hz and 250V to the housing for 1 minute without breakdown.
● When the working voltage of the Electromagnetic pulse valve is 85% of the rated voltage under the nominal air source pressure of the product, the opening response time shall be less than 003s.
● The Electromagnetic pulse valve shall be able to work normally after withstanding the vibration with frequency of 20Hz, full amplitude of 2mm and duration of 30min.
● Under normal use conditions, the cumulative service life of Electromagnetic pulse valve diaphragm shall be more than 800000 times< Eod>.