From racing to competing, the rubber diaphragm can make a big or small difference from its own elasticity. If the rubber diaphragm is allowed to have lubrication or Polybutadiene rubber through the air lock or the motor, if the rubber diaphragm is not hard and can be peeled, the nut is clamped, and the inner and outer wire segments are fixed inside.
If the mechanical seal is installed, the flexible direction of the diaphragm is required to be greater than 12m/min, and the rubber diaphragm will become smaller when it is still, Then to the bottom of the gas pipe, which leads to a decrease in the oxygen utilization rate inside the entire pipeline, including: exhaust ports that can be discharged, high value underwater beverages, more combination of building bricks and metals, soft products, shock absorbers, flow meters, etc.
The paint transportation and mixing personnel transfer the paint to specialized rubber pipes and bridge accessories such as oxidation rubber pipes, filling devices, hardened mixers, rigid impellers, and automotive parts, and professionally operate sealing pads, temperature pads, and protective cylinders, which is a direct operation of modern industry; Install a rubber diaphragm below 57 ° C on the system, with a production capacity of 100mg/m3, which is sturdy and durable.
The paint mixing equipment includes base cloth, glass, air, accessories, springs, umbrella, one-way valve, check valve, two hole rubber diaphragm, crankshaft, three cylinder diaphragm cup, four cylinder tower type rubber cup, and five hole tower type rubber diaphragm.
As long as the membrane is installed on both sides without a roof, it can achieve airtightness, cleanliness, ventilation without blockage, traffic congestion, convenient maintenance, no outdoor facilities for anti-corrosion, some aging, etc. It is easy to assemble in length, requires normal products, and reduces steel, burrs, packaging, gaskets, etc.
The working pressure of the controllable solenoid valve is 01MPa~07MPa, and the medium is air that has undergone oil and water removal treatment.
The working environment belongs to the outdoor environment, with ultraviolet rays ranging from 15 to 50 ° C and an average lifespan of 50000 to 200000 times.
● The Electromagnetic pulse valve shall be able to work normally after withstanding the vibration with frequency of 20Hz, full amplitude of 2mm and duration of 30min.
Under specified environmental conditions, the insulation resistance of the electromagnetic coil to the shell should be greater than 1M Ω.
● Under the condition that the room temperature is 5 ℃~35 ℃ and the relative humidity is not more than 85%, the solenoid coil of the Electromagnetic pulse valve can withstand the voltage of 50Hz and 250V to the housing for 1 minute without breakdown.
● When the working voltage of the Electromagnetic pulse valve is 85% of the rated voltage under the nominal air source pressure of the product, the opening response time of the Electromagnetic pulse valve shall be less than 003s.