The rubber diaphragm filter press is a new generation of solid-liquid separation equipment developed on the basis of material flushing and filter material industry, gradually synchronized and arranged.
Rubber diaphragm filter press is divided into rubber diaphragm filter press and polypropylene diaphragm filter press. The rubber diaphragm filter press is ideal for filtering materials that are weak acids, weak alkalis, and non organic solvents. The rubber diaphragm filter press has changed its previous fixed split type to save energy consumption after feeding, and the rubber diaphragm drum is more fully used. The pressure and gas volume used are relatively small, which can greatly reduce energy consumption.
The rack is the main component of the machinery, controlling the oil-water separator of various pumps, without the need for too many oil-water separators, with a natural frequency of 01-36%; The hose diaphragm filter press can separate solid and liquid with a moisture content of about 60%, especially when the concentration is below 10 ° C and the viscosity is greater than 20~+800mg/m3. It has the characteristics of acid and alkali resistance, alkali resistance, and good chemical stability.
The filter press is applied to sludge and sewage treatment, and the minimum moisture content of the filter cake has reached below 60%. Compared to traditional box type filter presses, the solid content of the filter cake can be increased by more than 2 times, and the transportation cost of the filter cake is greatly reduced. The filter cake can enter the power plant for direct combustion, truly turning sludge into a resource and sewage into a clear spring, completely replacing the box type filter press.
The box type filter press is an ideal equipment for separating the solid and liquid phases of suspension. Because expansion, filter cake moisture content, pH, and other factors need to be prepared, it is suitable for filtration, oxidation, and treatment of viscose.
The plate and frame filter press has the advantages of high pressing pressure and good corrosion resistance. The new generation plate and frame filter press can be used for sludge dewatering, and the lowest moisture content of the filter cake can be reduced; Box filter presses and low-pressure well filter presses with high requirements for sludge performance can use high-pressure filter presses to meet the needs of sludge filtration. There is a new generation of plate and frame filter presses developed for filter presses, and there is a new generation of box type filter presses that we do not know, which can be answered< Eod>.
