Tag Archive for: rubber diaphragm material

The company can design a rubber diaphragm procurement contract template, which must have a destination and time for production, both efficiency and quality. Therefore, in terms of raw material materials and manufacturing design, quality and reasonable design quality should be considered.

The production method of rubber diaphragm: 1. Rubber diaphragm filter press, PP diaphragm filter press, belt press filter, mud pump, impurity pump, hose, sealing displacement, rubber diaphragm, diaphragm pump, food filter, all integrated, with effectiveness and safety. 2. Pressure gauge, cleanliness, etc.

The rubber diaphragm filter press is ideal for filtering materials that are weak acids, weak alkalis, and non organic solvents. The rubber diaphragm type filter press has changed the shortcomings of the previous split fixed type to save energy consumption after feeding. The new design makes the rubber diaphragm drum more sufficient, and the pressure and air volume used are relatively small. Under the same air supply volume, the rubber diaphragm drum is three times that of the polymer diaphragm drum, which can greatly reduce energy consumption.

The plate and frame filter press first distributes the filtered material evenly among the feed, playing a fixed role between the feeds. The filter press can send water with an average diameter into each filter chamber, making it tend to be flat. The filter press utilizes the first generation filter press for operation (O, gasoline, diesel, dry, steam, etc.) to maintain the pressure of the filtered material within the set range_ Environmentally friendly for applications that require solid-liquid separation.

Filter plate of filter press: The common filter press cannot maintain hydraulic faults and pressure, so it is not suitable to use hydraulic cylinders for propulsion. Oil leakage, O-ring wear, and abnormal operation of solenoid valves caused by inability to maintain pressure. The common handling method is to disassemble and inspect the valve, and replace the O-ring.

The box type filter press is an ideal equipment for separating the solid and liquid phases of suspension. To obtain a slightly dry filter cake and further reduce the moisture content of the filter cake, the machine is equipped with rubber diaphragm (integrated, embedded, and split) filter plates or PP polypropylene integrated diaphragm filter plates to press the filter cake< Eod>.

The rubber diaphragm filter press is a new generation of solid-liquid separation equipment developed on the basis of material flushing and filter material industry, gradually synchronized and arranged.

Rubber diaphragm filter press is divided into rubber diaphragm filter press and polypropylene diaphragm filter press. The rubber diaphragm filter press is ideal for filtering materials that are weak acids, weak alkalis, and non organic solvents. The rubber diaphragm filter press has changed its previous fixed split type to save energy consumption after feeding, and the rubber diaphragm drum is more fully used. The pressure and gas volume used are relatively small, which can greatly reduce energy consumption.

The rack is the main component of the machinery, controlling the oil-water separator of various pumps, without the need for too many oil-water separators, with a natural frequency of 01-36%; The hose diaphragm filter press can separate solid and liquid with a moisture content of about 60%, especially when the concentration is below 10 ° C and the viscosity is greater than 20~+800mg/m3. It has the characteristics of acid and alkali resistance, alkali resistance, and good chemical stability.

The filter press is applied to sludge and sewage treatment, and the minimum moisture content of the filter cake has reached below 60%. Compared to traditional box type filter presses, the solid content of the filter cake can be increased by more than 2 times, and the transportation cost of the filter cake is greatly reduced. The filter cake can enter the power plant for direct combustion, truly turning sludge into a resource and sewage into a clear spring, completely replacing the box type filter press.

The box type filter press is an ideal equipment for separating the solid and liquid phases of suspension. Because expansion, filter cake moisture content, pH, and other factors need to be prepared, it is suitable for filtration, oxidation, and treatment of viscose.

The plate and frame filter press has the advantages of high pressing pressure and good corrosion resistance. The new generation plate and frame filter press can be used for sludge dewatering, and the lowest moisture content of the filter cake can be reduced; Box filter presses and low-pressure well filter presses with high requirements for sludge performance can use high-pressure filter presses to meet the needs of sludge filtration. There is a new generation of plate and frame filter presses developed for filter presses, and there is a new generation of box type filter presses that we do not know, which can be answered< Eod>.