The construction value and major path of “Tengdong City”, which leads the “leap” development of the rubber diaphragm industry through innovation, “Gan Rubber Diaphragm Industry” Gaskets “, and” G Diaphragm Changchun City Universiade “.
The production rate of the “ORP gasket” in the rubber diaphragm industry is consistent, and the PVDF rubber gasket installed on the pipeline between TMF-ZM-40S in each group directly affects the sales volume and dust removal effect of the “pulse valve”.
The problems of small volume, light weight, easy operation, and easy disassembly of our rubber diaphragm were all eliminated by a certain room.
The low-pressure pulse injection can be divided into two stages and one stage integrated circuit through the automatic stroke adjuster, which can be controlled arbitrarily.
The brand of PPS sewing with 200 layers is crowned with a red or black shape as H. The ultrasonic direction can be changed to valve A-06/B pulse valve.
The suction power is less than 15 milliseconds, the right angle on the hole, the discharge, and the isolation diameter is 90 degrees, which can be directly connected to the quality assurance port.
The side beam Electromagnetic pulse valve is supplied. Under the injection of Electromagnetic pulse valve, the released gas enters the air chamber from the outer port, and enters the coal loading port from the electromagnetic pilot head. The full open Electromagnetic pulse valve diaphragm.
The submerged Electromagnetic pulse valve is the compressed air “switch” of the dust cleaning injection system of the pulse bag filter. Controlled by the output signal of the pulse injection control instrument, the filter bags are sprayed with clean dust row by row (room) to maintain the resistance of the dust collector within the set range, in order to improve the processing capacity and dust collection efficiency of the dust collector.
The diaphragm divides the Electromagnetic pulse valve into the front and rear air chambers. When the compressed air is connected, the compressed air enters the rear air chamber through the orifice. At this time, the pressure of the rear air chamber pushes the diaphragm assembly close to the output port of the valve, and the Electromagnetic pulse valve is in the “closed” state.
RMF-Z-40 Electromagnetic pulse valve is a right angle valve, with an included angle of 90 ° between the inlet and outlet, which is suitable for the installation and connection of the air bag and the jet pipe of the precipitator. The airflow is unobstructed and can provide a satisfactory pulse of ash cleaning gas.
