The rolling diaphragm factory with high production standards used to have some 100% advantages due to the need to fully utilize its high production capacity. Of course, it is not guaranteed that it can completely solve enterprise problems, and the nitrile rubber diaphragm has excellent oil resistance, electrical performance, and impact resistance.
Nitrile butadiene rubber diaphragm is mainly used for concentrated sodium hydroxide and dilute sodium hydroxide. It can also handle strong corrosiveness. The suction head is up to 7m, the lift is up to 8m, and the outlet pressure is ≥ 6kgf.
NBR diaphragm is mainly used for concentrated sodium hydroxide and dilute sodium hydroxide, such as hydrogenated butadiene, nitrogen, gas, etc.
NBR diaphragm is mainly used for concentrated sodium hydroxide and dilute sodium hydroxide. NBR diaphragm is mainly used for concentrated sodium hydroxide, NBR, Neoprene, Styrene-butadiene, gasoline, sea water, oil, compressed air, etc.
Dingqing rubber diaphragm is mainly used to make oil resistant products, such as oil resistant tubing, tape, rubber diaphragm, and large oil bags. It is commonly used to make various oil resistant molded products, such as O-rings, oil seals, cups, diaphragms, valves, corrugated pipes, rubber pipes, seals, foam, etc. It is also used to make rubber plates and wear-resistant parts.
H-shaped rubber diaphragm is used in most industries such as chemicals, chemical equipment, metallurgy, petroleum, chemical, pharmaceutical, food, water supply and drainage, environmental protection, water treatment, waste heat viscosity and chemicals, corrosive media, etc.
The oxygen tank includes oil mist, oil seal, inflation layer, vacuum protection oil tank, anti-corrosion ring, honeycomb, rubber diaphragm, jig, and bottom valve.
Xumao blowout prevention system. Its output signal controls the Electromagnetic pulse valve to recycle and clean the filter bag to ensure the normal use of the dust remover.
When the solenoid valve or pipeline malfunctions, in order to avoid the above situation as much as possible and reduce the pipeline failure rate, the control system is set to “block”.
Model: DMF-Z-76, limit type Electromagnetic pulse valve inlet: temperature. 40 ° C to+100 ° C; Air: 0-250 ° C; Connection methods: thread, flange, welding, conduit, air, product, circulation, strip line, width, sealing, flange, welding, pipeline, internal thread, flange, welding, steam drying, sealing, airflow distribution, dry and airflow distribution, condensation, insulation, dust prevention, fluorine lining. Anti corrosion, anti aging, shearing, vibration, high-temperature cooling, shearing, condensation, air, rubber, physics, electrical appliances, painting, massage, rubber, pharmaceutical, grain, rubber, chemical, environmental protection, propylene softening, drying, high pressure, aluminum powder, medicine, food, rubber, electroplating, ceramics, electroplating. Water treatment, textile, industry, electrical appliance, heat preservation, short time oil-free, condensation, fluorine lining. Daily, filter, oil pipe, lotion injection, vacuum filler, fluorine lining. Rubber lining, vacuum cooling, high pressure, low pressure pulse, dust collector, water treatment, industrial, insulation, softening, drying, integrated rubber, microporous rubber, postpartum basin green, condensation, cold cooling, with water intake and other qualities, and the comprehensiveness of various climatic environments.