The rolling diaphragm industry has broad prospects for power generation, and various types of diaphragms can be customized according to customer requirements. Referring to foreign standards, it can be divided into three chambers according to cycle size. 1. Number of chambers: 1~01m3, circulation capacity: 25100, interval time: can be calculated based on actual time and quantity: ≥ 100m3, rated pressure: ≥ 100m3, H except for bottom flange, bottom, bottom, etc.
Reset explosion-proof solenoid valve, also known as diaphragm, is an excellent choice based on the reasonable utilization of actual diaphragm materials. Fluorine rubber and diaphragm are an excellent choice.
More activated carbon adsorption boxes: the immersed Electromagnetic pulse valve is an ideal device to control the flow of dust materials. The activated carbon adsorption box sprays dust from the filter bag row by row (room) through the dust removal head to achieve the purpose of environmental protection and dust removal.
BMDTM HMD ratio 11/H strives to remove gas from the submersible solenoid valve of the vertical dust humidifier.
MDVA: 40 to 82 85, 120 ±: 200 to 82, 60 CMD temperature resistance: 60 ° C, 120 ° C.
Rolling diaphragm
PN: When the solenoid valve diaphragm is connected, the time shall not be overloaded, and the 205~200 Nitrile rubber dust humidifier shall be able to adapt to overload operation.
GX type solenoid valve diaphragm divides the Electromagnetic pulse valve into front and rear air chambers. When the compressed air is connected, the compressed air enters the rear air chamber through the orifice. At this time, the pressure of the rear air chamber tightly sticks the diaphragm assembly.
The submerged Electromagnetic pulse valve is the compressed air “switch” of the dust cleaning injection system of the pulse bag filter. It is directly installed on the distribution box and has better flow characteristics. The pressure loss has decreased, making it suitable for workplaces with low air supply pressure.
The right angle Electromagnetic pulse valve is the compressed air “switch” of the dust cleaning injection system of the pulse bag filter. Controlled by the output signal of the pulse injection control instrument, the filter bags are sprayed with clean dust row by row (room) to maintain the resistance of the dust collector within the set range, ensuring the processing capacity and dust collection efficiency of the dust collector.
The welding dust humidifier consists of a uniform supply of material, a mixture of liquid, and a tear resistant diaphragm of the mill, making it easy to operate.
The dust humidifier is fed uniformly, and mixed with liquid and periodic gas in turn to realize dust humidification, ash unloading, Electrostatic precipitator and wet precipitator professional departments< Eod>.
