According to the importance and complexity of P technology, it can provide solid, transparent and round solenoid valves.
Rubber diaphragms are mainly used to improve food grade and foreign technology. Nowadays, food processing technology and industrial production have reached international advanced levels and are increasingly trusted by people.
There are various product numbers for rubber diaphragms, and they are non-standard designed and manufactured according to your needs. The diaphragms produced are integrally formed.
Food industry: liquid semi-solid, chocolate, salt water, vinegar, syrup, vegetable oil, Soybean oil, honey, animal blood.
Food industry: yeast, syrup, thickener, whitening agent, wine, fruit syrup, energy water heater, automobile, furniture, coolant, chemical industry, electroplating, environmental protection, food, ceramics, oil, water, oil, and so on.
After loosening the metering pump head, remove the fixed pump head (with electronic components attached to the impeller), use special rubber for the pipeline, and make a special pump head (with lubrication on the screw). Connect the slag opening device to the connecting rod, and take samples again when it is properly connected.
Before installation, it is necessary to ventilate and clean the debris inside the gas supply pipeline. During installation, pay attention to the direction of gas flow and whether the connecting pipe is correct.
Checking the failure of the rubber diaphragm of the pulse valve is a common fault, which directly affects the cleaning effect. This equipment belongs to the external filter type, with a skeleton inside the bag. It is necessary to check whether the parts that fix the filter bag are loose and whether the tension of the filter bag is appropriate. Is the support frame smooth to prevent wear on the filter bag. Compressed air is used for ash removal. Therefore, it is required to remove oil mist and water droplets, and the oil water separator must be cleaned regularly to prevent movement mechanism failure and filter bag blockage.
The installation status of the filter bag, whether there are any cases of bag dropping, loosening, wear, etc. after use, can be determined by visually observing the emission status of the chimney after operation.
● Always check the tightness of the control system. If the gas explodes in the bag, if there is a tower on the upper part of the filter bag, Hengyang will be the general city. If vacuum sampling or filter bag maintenance is carried out, it can be judged by visual inspection of the chimney emission after putting into operation< Eod>.