The procurement of rubber diaphragms needs to avoid the following logistics routes:
1. Rubber 505: Shandong Rubber Diaphragm Factory can produce parallel connections. This product procurement is completed, and can be cut and wrench wheeled according to customer requirements to maximize product transportation;
2. Conduct according to customer requirements;
3. The dust collector is arranged as a general contractor, mainly engaged in the fields of chemical engineering, metallurgy, mining, machinery, coal, food, energy, water treatment, biotechnology, etc., including large-scale, secondary hydraulic, automatic hydraulic, automatic control, automatic connection controller, screw conveyor, anode plate, plate and frame rubber diaphragm, box body, flange, star discharger, dust removal cylinder, automatic filter cartridge.
rubber diaphragm Regulator
Rubber diaphragm company:
1. The working pressure of the product is 01MPa~07MPa, and the medium is air that has undergone oil and water removal treatment.
2. Under the nominal air supply pressure of the product, the rubber diaphragm can work simultaneously without lubrication.
3. When the working voltage of rubber diaphragm 114 non-standard fixed ball valve is 85% of the rated voltage under the nominal air supply pressure of the product, the opening response time of the Electromagnetic pulse valve shall be less than 003s.
4. The product should be able to withstand an air supply pressure of 08MPa.
5. Under specified environmental conditions, the insulation resistance of the electromagnetic coil to the shell should be greater than 1M Ω.
6. Under the condition of room temperature ranging from 5 ° C to 35 ° C and relative humidity not exceeding 85%, the electromagnetic coil can withstand a voltage of 50Hz and 250V to the shell for 1 minute without any breakdown phenomenon.
7. The Electromagnetic pulse valve shall be able to work normally after withstanding the vibration with frequency of 20Hz, full amplitude of 2mm and duration of 30min.
8. When the working voltage of the Electromagnetic pulse valve is 85% of the rated voltage under the nominal air supply pressure of the product, it should be less than 003s.
9. The product should be able to operate normally after withstanding a vibration with a frequency of 20Hz, a full amplitude of 2mm, and a duration of 30 minutes.
10. Under specified environmental conditions, the electromagnetic coil can withstand a voltage of 50Hz and 250V on the shell for 1 minute without breakdown.
11. When the working voltage of the Electromagnetic pulse valve is 85% of the rated voltage under the nominal air supply pressure of the product, it should be less than 003s.
The product is water and oil resistant on the workbench at an ambient temperature of -20-80 ° C_ Rate [room temperature].
Bag type dust remover series cyclone dust remover series Electromagnetic pulse valve series pulse controller series dust remover bag type dust remover framework series discharger series hanging device series pulse valve diaphragm series cylinder series.
