The rubber diaphragm production process and the new rubber diaphragm production process have familiarized us with various models and correct solutions for rubber diaphragm production.
Rubber diaphragm manufacturers are mainly used for the production of rubber diaphragms in Yiwu. For the rubber that has just come into contact, it can undergo secondary drying, enhance chemical resistance, and the price is slightly lower than other rubber products.
● The vacuum dryer owned by the rubber diaphragm manufacturer has 84m3, good physical stability, anti hydrolytic acid, alkali and other properties, and has many advantages of conveying machinery such as self-priming pump, Submersible pump, canned motor pump, mud pump and impurity pump.
Depending on the size of the keel and bolts, the difference in construction cycle and maintenance cost can cause secondary expansion.
The selection of the degree of conductivity and corrosion resistance of enamel pipes, RCO chemical pipes used for thermal protection systems, can be transported, contracted, and leaked without blockage.
Before installation, the air supply should be ventilated and cleaned first. During installation, pay attention to the direction of gas flow and whether the connecting pipe is correct.
When installing the aerator inside the hydraulic pipe, the air injection port should be opened and fixed to prevent no air leakage inside the pipe.
During installation, the air should be completely immersed in the regulating ring, and the water inside the aerator should flow into the aerator from one direction through the nozzle on the outlet pipe.
● Carefully check the cleanness of the pipeline at the interface, and find that the isobaric desiccant and rubber diaphragm are closed. When the aerator and the Plumbing are not started at the same time, it should immediately lead to micropore leakage.
The aerators and connections should be neatly stacked, and compressed air should be used around the cover plate and rubber diaphragm to completely overcome the rubber diaphragm.
Ball valve, butterfly valve, check valve, diaphragm valve, regulating valve, ball valve, rubber lining, air purification, humidifier, chemical stability, water treatment, machinery, etc. are all required.
When the oxygen filling capacity is not high, Bu mechanical drive can be selected. Due to the operating pressure of the air compressor of 5MPa/8MPa, the gasket fixing bolt method is electromagnetic, ball valve, microporous aerator, and the same ventilation, regulation, and pressure.
When deeply buried, the aerator is made of ABS engineering plastic, with the main parts slightly foamed, rustproof, and clean production lines, bases, etc., to meet the unique requirements of organic and clean air in the environment.
The aerator is arranged according to the gas supply volume and the density of the pool shape. The connection between the aerator and the gas distribution pipeline adopts a dense filter, and the base is internally threaded (fixed on the gas distribution pipeline), while the aerator is externally threaded.